The application rate of Kaiping machines is becoming increasingly common, and appropriate operating modes will be selected during the construction process. Its advantage is that it constantly increases during use. Because its characteristics are recognized by everyone, the utilization rate is increasing. Let's learn about the correct configuration of the Kaiping machine.
Kaiping machine is a commonly used steel plate processing equipment. In order to ensure the quality of Kaiping steel plate, the equipment configuration needs to comply with the standards. It mainly consists of a loading trolley, an unwinding machine, a tray pressing device, a limit device, etc. The Kaiping machine is equipped with an upper mold and a lower mold. The upper mold is fixedly connected to the push rod of the hydraulic cylinder, and the cylinder body of the hydraulic cylinder is fixed on the support frame. The upper and lower molds are respectively equipped with independent cooling water channels, and the outlet and inlet of the cooling water channels are located on the upper or lower mold.
Starting from the entrance of the leveling machine, the ratio of the radius to the middle distance of at least the first five rollers is the same as that of a traditional straightening machine, and the ratio of the radius to the middle distance of at least the last five rollers is similar to that of a curling eliminator. The middle distance between the middle rollers of the machine increases. This structure ensures rapid quenching and cooling, and can also prevent impurities from entering the tool or tool blank, thereby ensuring the surface quality and hardness metallographic structure of the tool or tool blank, and avoiding contamination by cooling oil. A high-quality Kaiping machine has a good quenching and tempering furnace and a medium frequency quenching furnace, which can quench and temper all the pressure rollers in the equipment, so that the pressure rollers can obtain certain strength, hardness, and comprehensive mechanical properties, and have good plasticity and toughness. Moreover, after intermediate frequency quenching treatment, the hard layer of the pressure roller can reach five or six millimeters, which is very beneficial for improving the wear resistance and fatigue strength of the pressure roller and extending its service life.
The correct operation of the Kaiping machine is beneficial for extending the service life of the outdoor production line, ensuring normal production, and avoiding abnormal phenomena during the production process. During the operation of the equipment, it is prohibited to use the emergency stop button to stop the equipment and cut off the power supply in non emergency situations. During the stacking process, please strictly operate the stacker crane and promptly lift the packaged products to the yard to avoid affecting production. The cutting quality is obvious, and it can process very thin or thick materials. Its performance is not only reflected in the operation process, but also in its simplicity, high efficiency, and has been recognized by everyone.
The above is about the correct configuration of the Kaiping machine. If you are not familiar with it during operation, you can call for consultation to avoid losses caused by blind operation. Only by strictly following the operating procedures can the expected results be achieved. I hope the above content is helpful to you.
Editor: Chihiro
Language
