Kaiping line,also known as Kaiping cutting line,unwinding line,or transverse cutting line,is used to unwind,level,cut metal coils into flat sheets of the desired length and stack them.Suitable for processing cold-rolled and hot-rolled carbon steel,silicon steel,tinplate,stainless steel,and various metal materials after surface coating.So,how to maintain the Kaiping line?Let's take a look together.
After connecting the power,perform both forward and reverse movements of the lower roller and the upward and downward movements of the upper roller,and check for any abnormal jamming during each movement.Strictly follow the processing procedures and operating methods of the Kaiping line,and pay close attention to the operation of the equipment when the upper roller is lifted to the position.
After the main transmission stops,the lifting and lowering of the upper roller,the tilting and resetting of the flip bearing,and the lifting of the upper roller can be carried out.If any irregular noise,impact or other abnormal phenomena are found during operation,the machine should be stopped immediately for inspection.During operation,all personnel should be harmonious with each other,follow the instructions of the person in charge of the rolling board,and stop starting the machine without any commands.
When carrying out the operation of the Kaiping line,one should be very careful not to let their hands be pressed down by the steel plate and the steel plate be rolled in together.When lifting steel plates or drums with a crane,be careful not to collide with the machine.After completion,ensure that the finished materials are used up and the site is cleaned up,and carry out equipment protection and maintenance operations,and promptly shut off the power supply.
Language
