With the rapid development of the Kaiping machine industry, its application rate is becoming more and more common, and its quality is constantly improving. And it has been recognized and applied for its unique performance. For better use, let's take a look at the debugging issues of the Kaiping machine.
When the Kaiping machine starts continuous stamping, the speed control screw of the feeder should rotate clockwise, and the slider should move slowly, so that it can be seen whether the slider contacts the nylon pad and the length adjustment screw when it moves back and forth. Check if the feeding direction is correct before starting up. When the speed of the hoist remains constant and the feed distance needs to be reduced in length, first raise the guide screw to reduce the descent distance of the floating rod, and then rotate the speed control screw clockwise to match the speed of the hoist. Adjust the material rack and the distance from the leveling machine to the feeder. Adjust the distance appropriately according to the stamping speed and the feeding length of the feeder. The leveled material should be able to smoothly enter the feeder and mold.
The above is about the debugging of the Kaiping machine, which has various advantages widely used in many industries. We need to pay more attention to product knowledge, so that we can be more proficient in the future operation process. I hope the above content is helpful to everyone.
Editor: xxskr
Language
